Start WindowsEnabler from the WindowsEnabler program group. You will now see the configuration dialog.
Go to the connection tab.

Select TCP/IP for "Connection Protocol".
If you use TCP/IP, you must enter the host name or IP address in "AS/400 system".
Check the "Run WindowsEnabler/400 in Server mode" box.
Enter QUICKSTART for "Identifier for this server".
Right-click the WindowsEnabler taskbar icon and select "Connect" from the menu.
Close the configuration dialog
Verify whether WindowsEnabler is connected. The taskbar icon should be green:

Connected Disconnected

This PC is now a WindowsEnabler/400 server PC.